F.A.Qs

1. What does "MR" mean?

  • The term "MR" is a type of grade which stands for "Moisture Resistant" which can describe either plywood or block board.
  • It is mostaly suitable for use in the interior for making office and home furniture.
  • It can resist humidity and moistire but that does not indicate that it is water resistant or water proof.

2. What is “Marine” Plywood or “BWP” Grade?

  • “Marine” Plywood & “BWP” (Boiling Water Proof) Grade both comes under the same category of Government Regulation ISI: 710. Hence both the terms have the same meaning for Plywood and Block Board which is suitable for wet and humid conditions.
  • It is mostly used in those areas which are directly in contact with water like ships, boats and construction of docks.
  • It can be also used in exteriors of houses and offices or those interiors where furniture comes directly in contact with water.
  • Marine Plywood is strong and durable and can resist invasion by fungus and microbes

3. What is “Gurjan”?

  • Gurjan material is extracted from Gurjan trees.
  • It is known for its great strength, durability and its toughness.
  • Gurjan is used in Premium Range of Garnet ply products which is very superior in quality and is also priced on a higher side than other.

4. What is “Calibration”?

  • Calibration is a process done in a machine to make the plywood or block board at equal thickness at all 4 corners of the product. It removes the unwanted extra thickness so that the consumer gets the thickness he/she requires.
  • It gives the plywood extra smooth finish.
  • Such calibrated products of Garnet are highly suitable for Veneer or Mica Lamination, Fabrication or Paneling purposes.

5. What is “Double Hot Press” Technology?

  • Manufacturing of plywood is a step wise process.
  • In Double Hot Press Technology, after initial assembly of core veneers, they are pressed with HOT PRESS for first time and then cut and calibrated. After which the calibrated panel is glued and laminated with red colour “Gurjan” face veneer for second hot press.
  • This Double Hot Press Technology reinforces the glue giving the plywood superior strength, bonding, toughness and durability.

6. What is “Triple Hot Press” Technology?

  • Triple Hot Press Technology is applied only for Teak Products.
  • The core veneers are first Hot pressed after initial assembly, then cutting, calibration and gluing is done followed by second Hot Press to laminate Red Gurjan Face. In the end, third Hot Press is applied for lamination of decorative veneer or teak veneer on it.
  • Pressing 3 times in a row or the Triple Press gives the Teak or any decorative plywood extra strength and longer life.

7. How is 7 layer Block Board better than others?

  • The 7 layer Block Board is made from 4 layers of core veneers with a filler in the center which counts as one layer. The panel is than laminated with two red Gurjan face veneers on both sides of the board making all seven layers bonded together with high quality glue.
  • The 7 layer Block Board is far more stable, stronger and durable than others making it suitable for balanced construction.

Looks like wood but does not damage on water exposure,
can't believe that!! But you must,
it is BWP Marine Grade Plywood, the best waterproof Plywood!

BWP Marine Grade Plywood - The best waterproof plywood that stands the test of boiling water

No interior decor and design is complete without the touch of elegance and class of wood. Adding a luxurious charm to your space, whether it is an office, a shop or home, wood takes the ambience to the next level. However, the susceptibility of wood to damage by moisture and humidity, borers and termites always made consumers apprehensive about using it. But thankfully due to the introduction of superior quality plywood, customers no longer feel doubtful and can easily trust and use best quality plywood as per need and budget. Among the plywood available in the market, BWP Marine Grade plywood is highly popular amongst users. It can withstand exposure to moisture and water over a long period of time. Garnet, a renowned BWP marine grade plywood manufacturer brings premium quality marine plywood that is known to be the best waterproof plywood in the market with exquisite features for its discerning consumers.

Made from 100% authentic Gurjan wood, BWP plywood by Garnet, well known BWP marine grade plywood manufacturer

BWP marine grade plywood by Garnet is made from the veneers of Gurjan trees right from the core to the top layers. Sourced from the best forests, these trees offer the best quality wood for the marine plywood with features such as:

  • Uniformity of size
  • Stability and consistent width
  • Robust & strong
  • Good strength to weight ratio
  • Resistance to moisture
  • Durability
  • High nail holding capacity
  • Resistance to microbes

Exclusive manufacturing process that makes Marine/BWP plywood the best waterproof plywood

When conventional plywood is exposed to moisture and water, it enters into the pores of the wood as well as into the glue that holds the layers together. Sometimes, the moisture can be even seen coming out from the edges. The impact of moisture is visible in areas with high water usage such as kitchen counters or cabinets where the wood often swells and air bubbles can be noticed. Even bathrooms have these issues where woodwork often develops cracks with more swelling especially during the rainy season. Overtime the wood may even begin to rot. It may also be noted that the convex side of the plywood holds greater moisture than the concave side. This difference in moisture levels on the two sides leads to warping of plywood. Improper drying of this wood leads to shrinking of plywood and ultimately the woodwork looks de-shaped.

All these issues of moisture seeping into the plywood can be resolved to a great extent by using BWP Marine grade plywood, the best waterproof plywood in the market. Made using specialized glue, the phenol formaldehyde, this plywood can withstand boiling water for nearly 72 hours. Since this plywood has exclusively been engineered to resist extreme conditions of moisture and heat, hence it is referred to as boiling waterproof plywood. Garnet, a reputed BWP marine grade plywood manufacturer offers premium range of waterproof plywood with extra heavy density made from Gurjan plywood.

Offering the best waterproof plywood with minimal core gaps and uniform thickness

Garnet BWP Marine grade plywood is manufactured with high precision calibration and Quadro press technology that ensures uniform thickness at every corner and surface for maximum strength. The quadro press technology begins with a pre-press that allows the resin to settle and create air-tight core ply free from any gaps. This is followed by alternative, hot, cold press and then finally hot press that ensure adequate permeation of the glue in all directions. Stringent quality check measures including compressive strength check keep bonding control and retention of shape and strength. Apart from being the best waterproof plywood, it is also very flexible and can be easily cut and bent as per need into any shape or size. The bending capacity is also good making it highly recommended by designers and furniture makers. Besides, the Nail holding capacity check makes the plywood suitable for all kinds of applications.


Garnet, a leading BWP marine grade plywood manufacturer uses innovative additives to make BWP Marine grade plywood completely resistant to borers and termites allowing it to last for years to come. Conforming to ISI standards the Garnet BWP plywood comes in various thickness and sizes with top-notch quality, strength and versatility. Use of wide belt Italian sander machines in three steps ensures smooth constant sanding operation to give smooth finish.

The best waterproof plywood for interiors and exteriors- BWP Marine grade plywood

BWP marine grade plywood can be used for all types of interiors and exteriors owing to its flexibility, versatility and ability to tolerate harsh conditions. Its applications include:

  • Wooden boats or ships
  • Cabinets, counter tops and other utility spaces in kitchens where exposure to water is consistent
  • Bathroom cabinets or other wood work in toilets
  • Storage areas or cabinets in balconies or terraces
  • Lawn chairs and garden furniture

Why you should choose BWP Marine grade plywood for your wooden furnishings or modular kitchens?

  • It can withstand boiling water up to 72 hours
  • Can tolerate wear and tear for years
  • High load bearing capacity
  • High strength and shape retention
  • Does not warp
  • Maintains stability even under harsh conditions such as outdoors, kitchens or washrooms
  • High flexibility without compromising on strength
  • Treated chemically to make it resistant to unwanted pests such as borers and termites
  • Uniform thickness at every corner and surface

Garnet, a premium quality BWP Marine grade plywood manufacturer, brings you the best waterproof plywood owing to its 50 years of experience in the sector to offer products that last for more than 50 years. Supported by modern infrastructure, advanced technology and a team of highly qualified professionals, Garnet is leading the market with its innovative, affordable products that reflect its inner strength of being Born Bold!!